This is an old revision of the document!
Pinout of the Flipper
tags : flipper, nrf52, pinout, schematic
1. Description
Pinout Documentation generated with Graphical Datasheets
2. Top Side Pinout
WARNING !! There is a mistake on the pin naming : XLB connector is 2×10 pins, XLB_10 does not exist on the right side
3. Bottom Side Pinout
Warning !! this pinout view must be use with care, according to the silkscreen on the PCB, the pin NAME are right but the side is wrong !! pin 1 of the header is at the bottom right corner (not at left as in the pinout view)
