#include 
#include 

ADS1015 adcSensor;

void setup() {
  Wire1.begin();
  Serial.begin(9600);
  if (adcSensor.begin(0x48, Wire1) == true) // connect to device at address 0x48
  {
    Serial.println("Device found. I2C connections are good.");
  }
  else
  {
    while(1) {
      Serial.println("Device not found. Check wiring.");
    }
  }
}

void loop() {
  uint16_t channel_A0 = adcSensor.getSingleEnded(0);
  Serial.print("A0:");
  Serial.println(channel_A0);
  delay(50); // avoid bogging up serial monitor²
}